Sony PEGA-WL100 Operating Instructions (primary manual) Operating Instructions Manual page 16

Tip
Tapping the
explanation for the setting.
7
Enter a profile name in [ProfileName].
Specify a name freely according to the name of the other
communication device, access point, etc.
8
Enter a network ID in [NetworkID (SSID)].
Network ID (SSID) is fixed on the part of the access point you use.
Be sure to enter the network ID (SSID) that is specified by your
access point.
Note
Network ID is case-sensitive between capital letters and small letters. Be careful
when entering a Network ID.
16
mark in the upper right corner of the screen shows a brief