Summary of Contents for Sony KDL-22EX308 Operating Instructions (UWA-BR100)
Page 1
TV’s weight. Be sure to entrust the attachment of this product to the wall to Sony dealers or licensed contractors and pay adequate attention to safety during the installation. Sony is not liable for any damage or injury caused by mishandling or improper installation.
Page 2
Refer to your TV’s operating instructions for its weight. Install the Base Plate on the wall. Refer to the Instructions for SU-WL00. Disconnect all the cables from the TV. Additional Information for Using Sony Wall-Mount Bracket (SU-WL100) Length for each mounting angle Screen center dimensions Angle (0°)
Page 3
Mounting Hook Secure the Mounting Hook to the right side of the rear of the TV. Secure it to the TV using two screws (supplied with SU-WL00). Additional Information for Using Sony Wall-Mount Bracket (SU-WL100) Screw (+PSW4 × 12) Mounting Hook...
Page 4
* Hook position “a” cannot be used for the models in the table above. Remove the screws from the back of the TV. Do not remove any other screws from the TV. Additional Information for Using Sony Wall-Mount Bracket (SU-WL100) Hook Location − −...
Page 5
For details on the cable connection, refer to the Operating Instructions for your TV. Install the TV onto the Base Plate. Be sure to secure the TV to the Base Plate. Additional Information for Using Sony Wall-Mount Bracket (SU-WL100) − −...
Need help?
Do you have a question about the KDL-22EX308 Operating Instructions (UWA-BR100) and is the answer not in the manual?
Questions and answers