Performing Communications Directly Between Your Clié Handheld And Another Device On A Wireless Lan (Ad-Hoc Mode); Basic Settings - Sony PEGA-WL100 Operating Instructions (primary manual) Operating Instructions Manual

Performing Communications Directly
between your CLIÉ Handheld and
Another Device on a Wireless LAN
(Ad-Hoc Mode)
Your CLIÉ handheld can communicate directly with another device
on a wireless LAN without using a wireless LAN access point.
The Ad-hoc mode settings and communications require network knowledge.

Basic Settings

1
Insert the Wireless LAN card in Wireless
Communication Slot of your CLIÉ handheld.
2
Tap the [Prefs] icon on the home screen of your CLIÉ
handheld.
The [Preferences] screen appears.
3
Tap V in the upper right corner of the screen, and
select [Network].
The [Network] screen appears.
4
Tap V of [Service], and select [Wireless LAN].
Continued on next page
23