Table of Contents
Advertisement
3 Adding the fade-in effect or fade-out effect
5
Notes
• While recording to an MD, do not click any icon other than the TIMER icon in
• If the MD runs out of space while tracks are being recorded from a CD, the
• If the number or name of previously recorded tracks are displayed in orange
• If CD or MD information is not displayed correctly after completing the
• When all tracks on a CD were selected by dragging the Disc Information
58
The beginning of a track becomes louder gradually, or the end of a
track fades away gradually. When
of fade-in or begining point of fade-out moves by 0.1 second.
When
is draged to left or right, the begining point or end point
moves as you drag.
Click
.
Set Up dialog closes.
If you want to cancel the setting, click
the Tool bar. Recording will halt if you do.
recording operation is halted. Afterwards, M-crew may not function properly.
If this happens, restart M-crew.
for too long, M-crew may fail to work properly after the recording operation is
completed. Be sure to restart M-crew.
recording, click the Reload button to refresh the information.
display in the CD window to the MD window, the tracks cannot be deselected
individually. To deselect the tracks, you must deselect all of them by clicking
in the MD window.
or
is clicked once, end point
.
Advertisement
Table of Contents
