Table of Contents
Advertisement
4
5
6
7
8
70
Adjust the starting point (point A).
Each click of
or
by 1-frame interval* (1 frame = 1/86 second) during stereo
recording. You can also slide
A.
* In Monaural and LP2 stereo mode : 2-frame intervals
In LP4 stereo mode : 4-frame intervals
When adjustment of point A is completed, click
The track starts playing from point A. Clicking
the track position backwards or forwards, allowing you locate the
ending point (point B) of the erasure easily.
Click
when the part of the track that you want to erase
finishes playing.
The ending point (point B) is set temporarily.
Rehearsal playback is performed for about 4 seconds of a segment
that begins about 2 seconds before point A and ends about 2
seconds after point B.
Adjust the ending point (point B).
Adjust the location of point B using
point A.
When adjustment of point B is completed, click
The part from point A to point B is erased.
in the "A-B Erase" dialog box moves point A
to the left or right to adjust point
and
.
or
moves
or
as you did with
.
Advertisement
Table of Contents
