Display Bezel; Removing The Display Bezel - Dell Inspiron 7591 Service Manual

1. Place the display assembly on a clean and flat surface.
2. Align and place the palm-rest and keyboard assembly on the display assembly.
3. Using the alignment posts, close the display hinges.
4. Replace the three screws (M2.5x5) that secure the left-display hinge to the system board.
5. Replace the three screws (M2.5x5) that secure the right-display hinge to the system board.
6. Connect the display cable on to the connector on the system board and adhere the tape to the system board.
1. Install the WLAN card.
2. Install the battery.
3. Install the base cover.
4. Follow the procedure in

Display bezel

Removing the display bezel

1. Follow the procedure in
2. Remove the base cover.
3. Remove the battery.
4. Remove the WLAN card.
After working inside your computer.
Before working inside your computer.
Removing and installing components 49