Installing The Touchpad - Dell Inspiron 7591 Service Manual

1. Remove the three (M2x3) screws that secure the touchpad bracket to the palm-rest and keyboard assembly.
2. Lift the touchpad bracket off the palm-rest and keyboard assembly.
3. Open the latch and disconnect the touchpad cable from the system board.
4. Remove the two (M1.6x2) screws that secure the touchpad to the palm-rest and keyboard assembly.
5. Lift the touchpad, along with the cable, off the palm-rest and keyboard assembly.

Installing the touchpad

If you are replacing a component, remove the existing component before performing the installation procedure.
The figure indicates the location of the component and provides a visual representation of the installation procedure.
44 Removing and installing components