Table of Contents
Advertisement
a 1 mounting rail
for mounting the DAR 12xx on a
wall.
b 2 mounting brackets
for mounting the DAR 12xx on a
wall.
c 2 cover caps
d 1 exhaust socket
for exhaust ducting 150 mm.
e 1 reducing collar
for exhaust ducting 125 mm.
f 1 non-return flap
for fitting into the exhaust
connection on the motor unit (not
needed for recirculation mode)
Depending on model, the non-return
flap may already be fitted.
3 screws, 5 x 60 mm and
3 plugs, 8 x 50 mm
for fixing to the wall (DAR 12xx only).
The screws and plugs are designed
for use in solid walls only.
For other types of wall construction,
alternative fixings will be required.
Make sure the wall is able to take the
weight of the cooker hood.
2 self-locking screws, M6 x 16 mm
for attaching the DAR 12xx to the
mounting rail.
4 screws, M4 x 11 mm with base and
2 clamps
for securing the DRDC and DRUU
chimney covers (DAR 12xx only).
10 screws M4 x 8 mm
for fastening the cover caps and the
clamps (DAR 12xx only).
4 screws, 5 x 35 mm
for securing the DAR 11xx range hood.
Keep the following in a safe place:
Installation instructions
Installation
25
Advertisement
Table of Contents
