Miele DAR 1120 Operating And Installation Instructions

Ventilation system
Hide thumbs

Advertisement

Operating and Installation Instructions
Ventilation System
To prevent accidents and machine damage, read these instructions
before installation or use.
en - US, CA
M.-Nr. 09 824 260

Advertisement

loading

  Summary of Contents for Miele DAR 1120

  • Page 1 Operating and Installation Instructions Ventilation System To prevent accidents and machine damage, read these instructions before installation or use. en - US, CA M.-Nr. 09 824 260...
  • Page 2: Installation Instructions

    Installation Instructions Read these instructions and the "Important Safety Instructions" before installing this ventilation system. The installation steps are described in the enclosed "Installation Diagram". Leave these instructions with the appliance for the consumer/user. Information is subject to change. Please refer to our website to obtain the most current product specification, technical &...
  • Page 3: Caring For The Environment

    Caring for the environment Disposal of packing material Disposal of an old appliance The cardboard box and packing Old appliances may contain materials materials protect the appliance during that can be recycled. Please contact shipping. They have been designed to your local recycling center about the be biodegradable and recyclable.
  • Page 4: Appliance Dimensions

    Appliance dimensions...
  • Page 5 Appliance dimensions...
  • Page 6 Appliance dimensions a The hood with exhaust collar is only used in air extraction mode with an internal or external blower. b Installation area; Wall/ceiling area respectively for vent hole and outlet installation. For recirculation mode only the outlet installation is required.
  • Page 7 Appliance dimensions a The hood with exhaust collar is only used in air extraction mode with an internal or external blower. b Installation area; Wall/ceiling area respectively for vent hole and outlet installation. For recirculation mode only the outlet installation is required.
  • Page 8 Appliance dimensions a Installation area; Wall/ceiling area respectively for vent hole and outlet installation.
  • Page 9 Unless the instructions require a greater distance, the adjacent minimum safety distances apply for Miele cooktops. – If several gas surfaces are installed under the hood, the total output must be considered when determining the minimum safety distance.
  • Page 10 Miele Multiburner Gas cooktops < 43,000 BTU/hr (12.6 KW) 26" (660 mm) and no burner >18,800 BTU/hr (5.5 KW) Miele Multiburner Gas cooktops > 43,000 BTU/hr (12.6 KW) < 92,200 BTU/hr (27 KW) 30" (760 mm) and no burner >>18,800 BTU/hr (5.5 KW)
  • Page 11: Plywood Backing

    Plywood backing ^ Find the studs to the left and right of The majority of the weight of the the mounting location by tapping the installed ventilation system will be wall or using a stud finder. supported by the retaining plate. It ^ Mark a vertical cutting line along the must be firmly attached to the stud framing behind the drywall.
  • Page 12: Protective Film

    Installation Before installation read the information in the "Dimensions" and "Important Safety Instruction" chapters. Under certain conditions, there is a danger of poisonous fumes by when the ventilation system and a furnace drawing interior air run at the same time. Installation instructions The individual installation steps are described in the included Installation...
  • Page 13: Air Extraction

    Air extraction Exhaust ducting and connections WARNING Use smooth or flexible pipework made from approved non-flammable Danger of toxic fumes. materials for exhaust ducting. To achieve the most efficient air Gas cooking appliances release extraction and quietest noise levels, carbon monoxide that can be consider the following: harmful or fatal if inhaled.
  • Page 14 Air extraction – If the exhaust is ducted into an inactive flue, the air must be expelled parallel to the flow direction of the flue. Never connect an exhaust hood to an active chimney, dryer vent, flue, or room venting ductwork. Seek professional advice before connecting an exhaust hood vent to an existing, inactive chimney or vent...
  • Page 15: Electrical Connection

    If there is any question concerning the electrical connection of this appliance to your power supply, please consult a licensed electrician or call Miele’s Technical Service Department. ,WARNING: THIS APPLIANCE MUST BE GROUNDED...
  • Page 16: Technical Data

    Overhead lights with DRIB XL..97 lbs (44.1 kg) DAR 1120, DAR 1220 ..2 x 2 W DAR 1230 DAR 1130, DAR 1230 ..3 x 2 W with DRIB XXL .
  • Page 21 DAR 1120, 1130, 1150 DAR 1220, 1230, 1250 en - US, CA M.-Nr. 09 824 260 / 01...

This manual is also suitable for:

12301250Dar 1130Dar 1150Dar 1220