Table of Contents
Related Manuals for Miele DAR 1**0
Summary of Contents for Miele DAR 1**0
- Page 1 Operating and Installation Instructions Range Wall / Insert Hood To prevent accidents and damage to the appliance, you must read these instructions before installing the appliance and using it for the first time. en-US M.-Nr. 10 463 980...
-
Page 2: Table Of Contents
Contents Caring for the environment .................. 3 IMPORTANT SAFETY INSTRUCTIONS .............. 4 Guide to the appliance .................. 12 Description of functions .................. 14 Appliance combinations..................15 Operation...................... 16 Switch on the blower..................... 16 Turning off the blower.................... 17 Turning the overhead lighting on/off..............17 Energy-saving tips.................... -
Page 3: Caring For The Environment
Caring for the environment Disposal of the packing Disposal of your old appliance material Do not dispose of this appliance with your household waste. The cardboard box and packing materials protect the appliance during Old appliances may contain materials shipping. They have been designed to that can be recycled. -
Page 4: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS This appliance complies with current safety requirements. Improper use of the appliance can lead to personal injury and material damage. Read all instructions before installing or using the appliance for the first time. Only use the appliance for its intended purpose. Keep these operating instructions in a safe place and pass them on to any future user. -
Page 5: Technical Safety
Installation, repair and maintenance work should be performed by a Miele authorized service technician in accordance with national and local safety regulations and the provided installation instructions. Contact Miele’s Technical Service Department for examination, repair or adjustment. - Page 6 Tampering with electrical connections or components and mechanical parts is highly dangerous to the user and can cause operation faults. Defective components should be replaced by Miele original parts only. Only with these parts can the manufacturer guarantee the safety of the appliance.
-
Page 7: Proper Use
IMPORTANT SAFETY INSTRUCTIONS If the power cord is damaged, it must only be replaced by a qualified service technician. During installation, maintenance, and repair work, the ventilation hood must be disconnected from the electrical supply. It is only completely isolated from the electricity supply if one of the following applies: –... - Page 8 IMPORTANT SAFETY INSTRUCTIONS WARNING: TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A COOKTOP GREASE FIRE, OBSERVE THE FOLLOWING*: – a) SMOTHER FLAMES with a close fitting lid, cookie sheet, or metal tray then turn off the burner. BE CAREFUL TO PREVENT BURNS.
- Page 9 IMPORTANT SAFETY INSTRUCTIONS Overheated oils and fats can ignite and set the ventilation hood on fire. When cooking with oils or fats, do not leave pots, pans or fryers unattended. Never leave an electric grill unattended when grilling. Fat and debris deposits impair the proper functioning of the ventilation hood.
- Page 10 IMPORTANT SAFETY INSTRUCTIONS Proper installation WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: – a) Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction.
- Page 11 Never use a steam cleaner to clean the ventilation hood. The steam can reach the electrical components and cause a short circuit. Accessories Use only genuine original Miele parts. If parts or accessories from other manufacturers are used, the warranty will become void.
-
Page 12: Guide To The Appliance
Guide to the appliance... - Page 13 Guide to the appliance a Duct cover Optional accessory - DRDC in various heights b Recirculation vents Only in recirculation mode with conversion kit DRUU, optional accessory c Ventilation hood d OdorFree Charcoal Filter Optional accessories for recirculation mode. The charcoal filters are mounted to the rear panel of the baffle filter. e Baffle filter f Overhead lighting g Control panel...
-
Page 14: Description Of Functions
Description of functions The following functions are available on Air recirculation mode your ventilation hood, depending on the (with conversion kit "DRUU") model: Air venting with internal blower "DRIB" The baffle filter and the additional additional charcoal filter clean the indrawn air. -
Page 15: Appliance Combinations
Description of functions Appliance combinations The following appliance combinations are possible: Extraction mode Vented mode with Recirculation Ducting cover with internal external blower mode blower Range Insert Blower Blower DAR 1120 (30") DRIB XL or DREB XL or DRIB XXL* DREB XXL* Range Insert Blower... -
Page 16: Operation
Operation Switch on the blower Ventilation hood with blower DRIB/ DREB XL (700 cfm) Power levels 1 to 3 are available for light to heavy cooking vapors and odors. Gas power level Minimum switched on blower level If heavy cooking vapors and odors occur temporarily, e.g., during frying, from approx. -
Page 17: Turning Off The Blower
Operation Turning off the blower It is advisable to run the blower for a few minutes after cooking has finished to neutralize any lingering vapors and odors in the air. To turn the blower off, turn the blower switch to 0. Turning the overhead lighting on/off The overhead lighting can be turned on... -
Page 18: Energy-Saving Tips
Energy-saving tips This hood operates in a very efficient and energy-saving manner. The following will help you to save even more energy when using it: – Ensure that there is sufficient ventilation in the kitchen when cooking. If there is insufficient air flow during extraction mode, the hood cannot operate efficiently, causing increased operating noise levels. -
Page 19: Cleaning And Care
Cleaning and care Special instructions for stainless WARNING: TO REDUCE THE RISK steel surfaces OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE Stainless steel surfaces can also be THE FOLLOWING: cleaned using a non-abrasive stainless steel cleaner. Before cleaning or servicing the ... -
Page 20: Baffle Filter
Cleaning and care Removing the baffle filter Baffle filter The reusable stainless steel baffle During removal, the filter may drop to grease filters in the appliance absorb the ground. the solid particles of kitchen vapors This can result in damage to the filter (grease, dust, etc.) and prevent soiling and the cooktop. - Page 21 Ensure the spray arm is not obstructed. Use a common dishwashing detergent. Pull the grease tray upward and In a Miele dishwasher user either the remove it. "Normal" or "Grates and Filters" For cleaning purposes, observe the programm.
- Page 22 Cleaning and care Reinsert the baffle filters by pushing the filter upwards then pushing it in .
-
Page 23: Odorfree Charcoal Filter
The charcoal filters are installed on the back side of the baffle filters. You can purchase the OdorFree Charcoal Filter from Miele. The type and designation can be found in chapter "Technical Data". How to install/replace the charcoal filter ... -
Page 24: Service And Warranty
Miele This service is available in USA only. dealer or Miele Technical Service. The telephone number for Miele is listed MieleCare, our Extended Service at the back of these instructions. Contract program, gives you the... -
Page 25: Installation
Installation Before installation Installation Instructions Please refer to the accompanying Before installing the appliance, installation sheet for instructions on read all of the information contained how to install the appliance. in this chapter and also in the "IMPORTANT SAFETY INSTRUCTIONS"... -
Page 26: Installation Parts
Installation Installation parts... - Page 27 Installation a 1 vent collar for exhaust duct 9 3/4" (250 mm). The vent collar is not used for 2 self-locking screws, M6 x 16 mm recirculation mode. for attaching the DAR 12xx to the mounting rail. b 1 mounting rail for mounting the DAR 12xx on a wall c 2 mounting brackets 2 screws, M4 x 11 mm with base and for mounting the DAR 12xx on a wall...
-
Page 28: Appliance Dimensions
Installation Appliance dimensions Blower modules DAR 1120, DAR 1130, DAR 1150. - Page 29 Installation DAR 1220, DAR 1230, DAR 1250, DAR 1260 Range Wall Hood.
-
Page 30: Distance Between Cooktop And Ventilation Hood (S)
Installation a Minimum height required for exhaust air penetration when using a vent duct. b Recommended installation area for the electrical connection. c Attachment points: there must be a sub-construction capable of bearing the load in the area of the attachment point. - Page 31 Installation Distance between cooktop and ventilation hood (S) Miele Range Wall / Insert Hood DAR 1120, DAR 1130, DAR 1230 DAR 1150, DAR 1220 (36") DAR 1250 (30") (48") Internal / External Miele blowers DRIB/DREB DRIB/DREB DRIB/DREB DRIB/DREB (700 cfm)
-
Page 32: Btu Reducing Nozzle Set
Miele Range Tops and the Miele – When selecting an installation height, Range Gas Cooktops can be reduced. always take the user height into This requires the use of the nozzle set consideration. -
Page 33: Plywood Backing
Installation Find the studs to the left and right Plywood backing of the mounting location by tapping The majority of the weight of the the wall or using a stud finder. installed ventilation system will be Mark a vertical cutting line along the supported by the lower retaining center of each stud. -
Page 34: Air Venting
Air venting WARNING: Danger of toxic fumes. Only use smooth pipes or flexible Gas cooking appliances release duct hoses made from non- carbon monoxide that can be combustible materials for exhaust harmful or fatal if inhaled. duct. To reduce the risk of fire and to To achieve the greatest possible air properly exhaust air, the exhaust extraction with the lowest noise levels,... - Page 35 Air venting When duct is horizontal it must be laid to slope away at at least 1/8 inch per foot. This is to ensure that condensate cannot drain back into the appliance. If the exhaust duct is to be routed through rooms, ceiling space etc., the temperatures in these different areas may differ greatly, which means that...
-
Page 36: Electrical Connection
CSA C22.1-12, please consult a licensed electrician Canadian Electrical Code, Part I. or call Miele’s Technical Service Department. WARNING: THIS APPLIANCE MUST BE GROUNDED... -
Page 37: Technical Data
Technical data Total connected load DAR 1120, 1220 with blower DRIB XL or DREB XL 621 W DAR 1130, 1230 with blower DRIB XL or DREB XL 624 W DAR 1130, 1230 with blower DRIB XXL or DREB XXL 809 W DAR 1150, 1250 with blower DRIB XXL or DREB XXL 812 W Overhead lighting... - Page 38 Technical Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Headquarters and Miele Centre Princeton, NJ 08540 161 Four Valley Drive Phone: 800-843-7231 Vaughan, ON L4K 4V8 609-419-4298 Fax: www.miele.ca www.mieleusa.com...
- Page 39 DAR 1120, DAR 1130, DAR 1150 DAR 1220, DAR 1230, DAR 1250, DA 1260 en-US M.-Nr. 10 463 980 / 00...