BBV RX100 Installation Manual page 37

BBV Rx100
Application Notes
The RX 100 provide the following functionality when controlling the above mentioned dome
Variable speed Pan/Tilt.
Zoom/Focus, Focus/Iris Override returning to auto after Zoom In/Out.
16 Full scene presets.
2 preset patrols. (PATROL1 = RX100 patrol and PATROL 2 = dome's TOUR 02)
Learned tour playback using AUTOPAN key.
5 minute datum/park driving to preset 1 or dome's TOUR 2. Disabled by removing link J6/1-2
Program up to 16 privacy zones
Advanced Features Tx400 Tx1000
Display MENU '#' 1
ENTER in MENU '#' 2
ESC in MENU '#' 3
The dome and Rx100 are linked using RS485 for control and video for the camera signal.
Rx100 Description
J3-C1 TX-/B
J3-C2 TX+/A
Notes:
The dome address must be set at 1 for all the cameras that are controlled using a Rx100. Check with the dome manual if you
have any doubts.
The alarm output relay opens for approx 5 seconds upon power up and following any active alarm input.
If the learned tour playback is running, start patrol 1 is inhibited. The dome will be driven to a preset following an alarm
activation. 60 seconds after alarm, the learned tour will restart. A manual goto preset and lens control will stop the tour
leaving the AUTOPAN led on until the next manual pan command.
J6 Links
J6/1-2 fitted to enable the 5 minute datum mode. After 5 minutes of inactivity the dome will be driven to either preset 1 or the
dome's TOUR 2 is started depending upon link J6/3,4,5. J6/4-5 fitted = goto preset 1, J6/3-4 fitted = start dome TOUR 2.
The dome's TOUR 2 must be programmed from within the domes menu. Please refer to the dome manual for details.
Rx100 installation manual V1.17 29 Aug 08.doc
Interface Receiver
Addendum to manual for the following domes:
Vista PowerDome
Rx100 software RX1_V3V2
Tx1500
'#' WASH 1 '#'
'#' WIPE 2 '#'
'#' AUTOPAN 3 '#'
Dome connection
RS485 B -
RS485 A +
DM DS/DS2/BX2 Mux
*889 002 or *889 10 10 2
*889 003 or *889 10 10 3
*889 004 or *889 10 10 4
Page 37