Setting Up; Choosing The Power Sources - Sony ZS-D5 Operating Instructions Manual

Setting Up

Choosing the
power sources
You can use the AC power or
batteries as a power source.
Use the AC power source
whenever you record since
recording consumes much
power.
Note
Be sure to turn off the
power of the player
before connecting/
disconnecting the AC
power cord or
removing/inserting
batteries.
Tip
The sound quality may
be changed depending
on the polarity of the
plug. Change the
direction of inserting
the plug and check the
sound quality.
34
Setting Up
14
Battery compartment
1 Inserting the back-up batteries
Insert four size AA (R6) batteries (not supplied) into
the battery compartment. These batteries work to save
the memory data.
Insert four size AA (R6) batteries (not supplied)
Replacing batteries
With normal use, the back-up batteries should last for
about six months when the player is operated on
batteries. When the time display dims or when the
timer function is disabled, replace all the batteries
with new ones. To save the preset settings, replace the
batteries with the AC power cord connected.
2 Connecting the AC power cord
Insert one end of the supplied AC power cord to the
AC IN socket located at the rear of the player, and the
other end to the wall outlet.
AC IN
2
To a wall outlet