Handle Position; Powerfoot Height Adjustment; Special Tools - Bissell PowerForce 3522 User Manual

How To Use Your BISSELL PowerForce

Handle Position

Press the Handle Release Pedal with your foot to place your
BISSELL PowerForce into one of three cleaning positions.
Upright- For storage and above floor cleaning with
1.

special tools.

Normal Cleaning- Press Handle Release Pedal once.
2.
Use for most household floor cleaning tasks.
Low Cleaning- With the vacuum in normal cleaning
3.
position press Handle Release Pedal again.
Use for reaching under low furniture such as
tables, chairs and beds.

Powerfoot Height Adjustment

The Powerfoot/Rotating Floor Brush on your BISSELL
PowerForce can be adjusted to clean several floor surfaces.
NOTE: For optimal cleaning performance,
adjust to the lowest practical setting. If
your cleaner is difficult to push, adjust to
the next higher setting.
Place Handle in Upright Position.
1.
Turn Floor Surface Selector to desired setting.
2.
Lowest Setting - For bare floors.
Medium Settings - For short and medium pile carpets.
Highest Setting - For plush pile or Berber carpet.
Place the Handle into the Normal Cleaning position
3.
and the Powerfoot will adjust to the setting chosen.
NOTE: You may also adjust the setting
while in the Normal Cleaning Position.
Special Tools
Your BISSELL PowerForce is not only a powerful carpet
and rug vacuum cleaner, it's also a versatile above floor
vacuum cleaner when you select one of the special tools.
Raise Handle to Upright Position.
1.
Grasp the Quick Reach Handle and lift up to separate from
2.
suction intake opening.
Attach tools by firmly pushing onto Hose Wand or
3.
Extension Wand.
6
Tip:
Before cleaning under low
furniture, check area first
for objects that might harm
the unit or block the
Vacuum Hose.
CAUTION:
The Rotating Floor Brush
continues to rotate while tools are
in use. To reduce the risk of injury
from moving parts, always move the
vacuum cleaner with the Carrying
Handle at the back of the cleaner.
Always place vacuum cleaner on
floor with Handle in Upright position
when using tools. Never place your
fingers under the vacuum cleaner
when it is running. Never place
Powerfoot on furniture or uneven
surfaces. Do not place vacuum
cleaner close enough to objects to
pull them into rotating brush.
Tip:
Hair, string and small
objects can block
the Vacuum Hose
or Tools. Check
them occasionally
for obstructions. See
Troubleshooting
Guide for instructions.