Siemens MK8000 Quick Reference Manual page 44

Opc server for subsystems

Hide thumbs Also See for MK8000:

Table of Contents

Configuring the MK8000

Building Technologies

Fire Safety & Security Products

NK822x - Serial link

–

Drag one of the NK822x serial lines to the NS8210 NK8000 Driver.

Fig 34

Connecting NK822x serial line to the NS8012 CDI-Net Driver

SI410 connection

–

Drag the SI410 unit to the SI410 Driver.

Fig 35

Connecting SI410 Sintony to the corresponding driver

Note: SI410 network connections, supported via protocol tunnelling over IP LAN, will

also be configured with the same type of link. In the COM port setting (see 5.6 be-

low), you will then select the virtual port emulated in software.

 See the DMS8000 Network, Fire, and Intrusion Connectivity Configuration Guide

(document no. A6V10062425) for more information on SI410 connectivity options.

FC330A/CC1115 connection

–

Drag the FC330A unit to the NS8015 Fire CNDL Driver.

Fig 36

Connecting FC330A unit to the corresponding CNDL driver

048_DMS_MK8000_ICC_MP4.10_A6V10062407_a_en.doc

06.2007

Table of Contents