Table of Contents
Advertisement
INSTALLATION AND OPERATION MANUAL, DIRECT STEAM SINGLE & TWIN MIXER
KETTLE, MODELS DLTM-40 TO DLTM-100 AND DLTM-40-2 TO DLTM-100-2
8.0 TROUBLESHOOTING (Continued)
OVERHEATING OF SYSTEM
1. Continuous operation at relief setting.
a) Stalling under load.
b) Viscosity of oil too high.
2. Excessive slippage or internal leakage.
a) Fluid too low.
3. System relief valve set too high.
4. Power unit ambient too high.
5. Insufficient volume of cold water supply to oil cooler.
Part No. 10040R4
20
2018-12-05
Advertisement
Table of Contents
