Table of Contents
Advertisement
INSTALLATION AND OPERATION MANUAL, DIRECT STEAM SINGLE & TWIN MIXER
KETTLE, MODELS DLTM-40 TO DLTM-100 AND DLTM-40-2 TO DLTM-100-2
8.0 TROUBLESHOOTING (Continued)
EXCESSIVE WEAR
1. Abrasive material in oil causing wear.
2. Oil viscosity too low.
3. Pump misalignment.
4. Air being drawn in through inlet of pump.
5. System pressure exceeds pump rating.
BROKEN INTERNAL PARTS
1. Lack of oil.
2. Excessive torquing of housing bolts.
3. Solid matter being drawn in from reservoir.
DIRTY OIL
1. Components not cleaned properly after servicing.
2. Air breather left off.
3. Filter dirty or ruptured.
FOAMING OIL
1. Return line not below oil level.
2. Oil contaminated.
3. Suction leak to pump.
MOISTURE IN OIL
1. Water in oil supply.
2. Extreme temperature differential.
Part No. 10040R4
19
2018-12-05
Advertisement
Table of Contents
