Displaying Maximum Input Level - Peak Hold - Sony PCM-M1 Operating Instructions Manual

Tip
You can also set PEAK
HOLD during recording.
Press CLOCK/SET for 2
seconds or longer, and the
display will go directly to
"PEAK on" or "PEAK
oFF" selection. Select with
RESET • + or COUNTER
• – and enter with
CLOCK/SET.
26 EN
Recording
Displaying maximum input level —
PEAK HOLD
PEAK HOLD holds the maximum input level on the
peak level indicator for easy recognition.
1
Press CLOCK/SET for 2
seconds or longer. "CLOCK"
will appear in the display.
2
Press RESET • + or
COUNTER • – repeatedly and
select "PEAK SET".
3
Press CLOCK/SET.
4
Press RESET • + or COUNTER • – repeatedly and
select "PEAK on".
5
Press CLOCK/SET.
The display returns to the clock.
To reset the peak value
Press RESET when the tape counter is not displayed. It
is also reset when the tape is removed.
The peak value display is replaced
with a new one whenever there is
a larger input.