Adjusting The Copy Code (Id6) - Sony PCM-M1 Operating Instructions Manual

Note
You cannot adjust ID6
while recording. Adjust it
before recording.
28 EN
Recording

Adjusting the copy code (ID6)

When recording with analog connection (with a
microphone or from the LINE IN jack), or when
recording digital input in the IEC958 format, you can
adjust the copy code (ID6). The factory preset of ID6 is
"00".
1
Press CLOCK/SET for 2
seconds or longer. "CLOCK"
will appear in the display.
2
Press RESET • + repeatedly
and select "ID6 SET".
3
Press CLOCK/SET while "ID 6
SET" is displayed.
4
Press RESET • + or COUNTER • – repeatedly and
select the copy code you want to give to this
recording.
ID6 00 : Digital duplication permitted an unlimited
number of times
ID6 10 : Cannot be copied digitally
ID6 11 : Can be copied digitally only once
5
Press CLOCK/SET.
The display returns to the clock.