Buddy List Setup - Navico Simrad RS90S User Manual

Tracking a buddy - introduction
You can select a buddy or list of buddies continuously track their
positions.
You can also start and stop tracking your buddy and add or remove
buddies from your buddy track list.
The radio sends an LL Request to each buddy in turn at a set time
interval and, if a response is received from a buddy, it displays the
buddy's LL position on screen.
To set up buddy tracking, you need to:
1.
Setup your buddies list. See "Buddy list setup" on page 86.
2.
Create a tracking list of up to three buddies.
3. Set the tracking interval.
4.
Select a buddy to track.
5.
Start/stop tracking the buddy.
Steps 2 to 5 are explained below.
Note:
request to a buddy. See "Sending an LL request for the position of a
buddy" on page 52.
Creating your tracking list
1.
Select DSC MENU
Hi
DSC
C
2.
Select TRACKLIST. Any buddies already on the tracking list will be
DSC CALL
PRI
DISTR LOG
listed.
SENT CALL
LL REQUEST
TRACK BUDD
USA
3. To add a buddy to the tracking list, select ADD NEW to show your
list of buddies.
Hi
DSC
C
4. Select a buddy then press [OK] to add that buddy to the tracking list.
TRACK BUDDY
PRI
START TRACK
SET BUDDY
To delete a buddy from the tracking list
TRACKLIST
INTERVAL
USA
Select that buddy, then press [OK].
•
Hi
DSC
C
•
TRACKLIST
PRI
ADD NEW
A
USA
Note:
You can also send an individual DSC latitude and longitude
TRACK BUDDY.
Select YES to delete, or
NO to keep the buddy in the list.
The tracking list is limited to three buddies.
DSC procedures | RS90S User Manual
| 53