Sent Call; Ll Request; Setup - Navico Simrad RS90S User Manual

Hi
DSC
C
DSC CALL
PRI
ALL SHIPS
CALL LOG
DISTR LOG

SENT CALL

USA
1.
Hi
DSC
C
01 KITTIWAKE
PRI
2.
INDIVIDUAL
ROUTINE
05:00
3.
USA
Hi
DSC
DSC CALL
PRI
CALL LOG
DISTR LOG
SENT CALL

LL REQUEST

USA
Lo
Hi
DSC
LL REQUEST
PRI
SUNBIRD
1.
KITTIWAKE
AXIOM
USA
2.
Hi
3.
DSC
SUNBIRD
PRI
LL REQUEST
A
4.
SEND?
USA
5.
52 |
Viewing the sent call log
The Sent Call log contains details for the 20 most recent calls sent
from your radio.
You can review details of each call, and delete calls from the list as
required.
Select DSC MENU SENT CALL.
The first entry in the call log is the most recent sent call.
Press or to scroll through the sent calls.
With a particular call displayed, press [OK] to display the DELETE
prompt:
•
Press DELETE to delete the entry from the sent call log, or
•
Press [X] to exit without deleting.
Sending an LL request for the position of a buddy
The latitude and longitude request (LL request) function allows
you to send a DSC request to an MMSI on your buddy list and the
response will contain the current latitude and longitude position
of the other vessel. In this way, you can check the location of your
buddy. This is also known as a "polled position request. "
Note: You must first set up details of your buddy in the buddy list
(see "Buddy list setup" on page 86).
Press DSC MENU LL REQUEST.
Select the buddy whose LL position you want to request.
When the "SEND?" prompt appears, press [OK] to send the LL
request.
If the buddy radio responds with a position, the RS90S beeps:
•
Press the [SILENC] softkey to silence the alert.
•
Press or to view the LL information received.
If there is no reply within 30 seconds, the display shows: "SEND
AGAIN?"
You can then select:
• [YES] to send again, or
• [NO] to quit and return to standby mode.
DSC procedures | RS90S User Manual