The Standby Screen - Navico Simrad RS90S User Manual

•
•
•
•
•
•
•
•
•
•
•
•
18 |

The standby screen

The following illustration shows a typical operating screen in
standby mode. The radio is in standby mode when it is waiting to
send or receive calls.
DSC
Hi
DISTRESS
14:43 UTC
5Kt
128
t
55 33.122
N
012 42.408 E
WPT: HARBR
n
8.00
0.50>
275
t m
The above screen shows:
The radio is tuned to channel 16, which has been designated as the
priority channel (PRI).
In this unit, Channel 16 has been named "DISTRESS."
Transmitting power is set to high (Hi).
DSC is enabled.
The time is 14:43 UTC.
The current course is 128° true and speed over ground is 5.0 knots.
The current latitude is 55°33.122'N and longitude 012°42.408'E.
The channel bank selected is International (INT).
The name of the destination waypoint is HARBR.
The unit selected is Nautical Miles (nm).
The destination waypoint is 8 nm away at a bearing of 275° true.
The current Cross-Track-Error is 0.5 nm to port (requires a course
change to starboard).
Getting started | RS90S User Manual
PRI
INT