3CH scan mode
•
With any of your favourite channels selected (by pressing the 3CH
key), hold down [SCAN] to start scanning your favourite channels
and the priority channel.
•
Press [SCAN] again to stop at the broadcast channel.
•
During scanning, press [X] to cancel 3CH scanning and return to the
previously selected channel.
•
Press SCAN or PTT to stop at the currently scanned channel.
•
To scan only one of your favourite channels, press 3CH then
immediately press and release SCAN.
For further information on 3CH, see "Making a routine radio call" on
page 25.
3CH scan functionality is limited in some European countries
Note:
and, if ATIS is enabled, the 3CH scan mode will be disabled.
Dual watch scan
Dual watch scan monitors the current working channel and the
priority channel.
To enter dual watch scan:
•
Short press [SCAN].
The DW icon will be displayed on screen.
To exit dual watch scan:
•
Press [SCAN] or [X].
Notes:
•
For US models, you can select Channel 9 as the priority channel (see
"Priority channels" on page 21 ).
•
To scan both channel 16 and channel 9, see "Tri watch scan" next
page.
Operating procedures |
RS90S User Manual
| 31