Table of Contents
Advertisement
PTT Key
The Push to Talk (PTT) key activates the microphone and transmits
your voice over the selected channel.
Notes:
•
Pressing PTT while a menu is displayed will exit the menu without
making any selection.
•
DSC transmission has higher priority than PTT voice transmission.
•
During PTT transmission, the radio cannot receive a DSC call.
•
If PTT gets stuck or accidentally held in the talk position, a built-in
timer sounds an error beep and shuts down the transmission after 5
minutes.
Using the menus
The [CALL/MENU] button provides access to two different menus as
Hi
DSC
C
follows:
DSC SETUP
PRI
USER MMSI
•
Short press to access the DSC menu.
GROUP SETUP
INDIV REPLY
DSC FUNC
USA
•
Long press (press and hold) to access the main menu.
Hi
To use the menus:
DSC
C
•
Use
MENU SELECT
PRI
WAYPOINT
N2K DATA
•
Press [OK] to select a menu option, or
VOICE REC
BACKLIGHT
USA
•
Press [X] to go back without selecting an option.
Note:
10 minutes, it beeps a warning and then automatically returns to
standby mode.
Shortcut keys
The RS90S wired handset keypad includes a SHIFT key that modifies
the function of some keys.
•
Press [SHIFT] to display the shift icon (S), and then press the number
key to access the required function.
SHIFT + 2
Press [SHIFT], then press 2 to access the AIS SETUP menu.
Press [SHIFT], then press 3 to access the external speaker ON/OFF.
SHIFT + 3
SHIFT + 4
Press [SHIFT], then press 4 to access the Waypoint menu.
or
to scroll to the option you want.
If the radio is left in menu mode, after a default time of
Getting started |
RS90S User Manual
| 23
Advertisement
Chapters
Table of Contents
