Ebyte E810-DTU User Manual page 23

Ethernet to 485/232
(2) Open two network debugging assistants, set the network debugging assistant protocol type to UDP Client, the network debugging assistant's server IP address is set
to the module's IP address, the network debugging assistant's server port is set to the module's local port, click Connect.
(3) Enter a string of data in the sending area of network debugging assistant A, click Send, you will see that network assistant B has received the same data in the
sending area of the serial port. Input a string of data in the sending area of network debugging assistant A, network assistant B also received the data. It realizes bidirectional
transparent transmission.
Copyright ©2012–2017，成都亿佰特电子科技有限公司
Figure 28 Data transparent transmission
E810-DTU User Manual
22