Card Reader Board - HP 15 Maintenance And Service Manual

Card reader board

Table 5-9 Card reader board and cable descriptions and part numbers
Description
Card reader board
Card reader board cable
Before removing the card reader board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the card reader board:
1. Disconnect the cable from the ZIF connector on the card reader board (1).
2. Remove the Phillips M2.0 × 2.8 screw (2) that secures the board to the computer.
3. Remove the board from the computer (3).
Reverse this procedure to install the card reader board.
(Preparation for disassembly on page
Bottom cover on page
Battery on page 32).
29).
30).
Component replacement procedures
Spare part number
L52030-001
L52027-001
41