Intended Audience; Notice About This Publication; Typographic Conventions; Preface - DTC SOL8SDR-R Hardware Manual

SOL8SDR Hardware Guide

0. Preface

0.1 About this Document
This document contains relevant information required to identify and install the equipment or system.
Since the available functions are licensed and depend on the specific implementation, not all the functions
and or applications contained in this document may be relevant or applicable to the system you will be
working with.
The actual presentation may differ from those in this document due to hardware or software changes.
0.2

Intended Audience

This document is for anyone interested in how the system can be used, but it is of most benefit to:
Operators who are in charge of the daily operation of the equipment

Installers who are responsible for the pre-installation, on-site installation and configuration of the

system in the end-user environment
Maintainers who are responsible for maintaining the equipment or system

0.3

Notice about this Publication

While DTC makes every attempt to maintain the accuracy of the information contained in its product
manuals, the information is subject to change without notice.
Performance specifications included in this manual are included for guidance. All particulars are given by
DTC in good faith, actual performance may vary.
0.4

Typographic Conventions

This document uses these typographic conventions to identify text that has a special meaning:
Typographic Convention
TEXT in small capitals represents a specific key press on the console
keyboard or hardware panel.
The + sign means "hold down the first key while pressing the
second key".
<Text> Serves as a placeholder for variable text that you will
replace as appropriate to its context.
Text in bold emphasises a new word or term of significance.
Text in italics can represent a link to place in the existing document
(often these are hyperlinks) or a reference to another document.
Successive menu selections are shown using arrows to indicate a
sub-menu. In this example this would mean:
Select the Insert menu, then select picture, then select from file.
The information contained in this document is the property of Domo Tactical Communications (DTC) Ltd.
Any copying or reproduction in any form whatsoever is prohibited without the written permission of DTC.
© 2016 Copyright Domo Tactical Communications (DTC) Limited. All rights reserved.
Commercial in Confidence Revision 8.0
Example
ESC, F1, SHIFT
Press CTRL+C to abort
Use the filename
<system_name>.sys for...
We call this a protocol and its
function is...
Refer to section 0.4 Typographic
Conventions.
Insert>picture>from file
Page 0-1