Advertisement
SOL8SDR-C Quick Start Guide
No
Item
1
34-way header
2
SMP 50 ohm jack
3
SMP 50 ohm jack
4
MCX jack
5
MCX jack
CAUTION: The SOL8SDR-C will need consideration for heatsinking or fan cooling as part of the installation.
Revision 1.0
Connection
1. Connect D1804 breakout PCB.
2. Connect J4 (ETHERNET) to a PC or network Ethernet port via CA2856
and D918.
3. Connect J2 (PWR) to 12V power via CA3043.
RF-A COFDM antenna.
RF-B COFDM antenna.
SDI-1 video input.
SDI-2 video input.
Page 1
Advertisement
Table of Contents
Related Manuals for DTC SOL8SDR-C
Summary of Contents for DTC SOL8SDR-C
- Page 1 RF-A COFDM antenna. SMP 50 ohm jack RF-B COFDM antenna. MCX jack SDI-1 video input. MCX jack SDI-2 video input. CAUTION: The SOL8SDR-C will need consideration for heatsinking or fan cooling as part of the installation. Revision 1.0 Page 1...
- Page 2 SOL8SDR-C Quick Start Guide The SOL8SDR-C IP address can be established using DTC’s Node Finder application. If DHCP settings need to be disabled and a fixed address applied, right click on the device to reconfigure. Double click the device on Node Finder to open web browser communications.
Need help?
Do you have a question about the SOL8SDR-C and is the answer not in the manual?
Questions and answers