Table of Contents
Advertisement
Kinetix 3 Component Servo Drives
About the Kinetix 3 Drives
Kinetix® 3 component servo drives provide simple solutions for applications with output power
requirements in the range of 50...1500 W (0.6...9.9 A rms).
See the Kinetix 3 Component Drive User Manual, publication 2071-UM001, for detailed
information on how to wire, apply power, troubleshoot, and integrate with Micro800® or
MicroLogix™ controller platforms.
Catalog Number Explanation
This publication applies to the following Kinetix 3 drives.
Cat. No.
Input Voltage
2071-AP0
2071-AP1
240V AC rms, 1 Ø
2071-AP2
2071-AP4
2071-AP8
240V AC rms, 1 Ø or 3 Ø
2071-A10
220V AC rms, 3 Ø
2071-A15
Before You Begin
Remove all packing materials, wedges, and braces from within and around the components.
After unpacking, check the item nameplate catalog number against the purchase order.
Safety Information
SHOCK HAZARD: Capacitors retain charge for approximately 300 s after power is removed.
Disconnect incoming power and wait at least five minutes before touching the drive. There is a
status indicator on the front of the drive that shows there is charge on the capacitors. Failure to
observe this precaution could result in severe bodily injury or loss of life.
2
Rockwell Automation Publication 2071-IN001F-EN-P - February 2017
Continuous Output Power
50 W
100 W
200 W
400 W
800 W
1.0 kW
1.5 kW
Continuous Output Current (0-
pk)
0.85 A
1.56 A
2.40 A
4.67 A
7.07 A
9.90 A
13.99 A
Hide quick links:
Advertisement
Table of Contents
