Catalog Number Explanation; Before You Begin - Allen-Bradley Kinetix 7000 Installation Instructions Manual

Catalog Number Explanation

This publication applies to the following Kinetix 7000 servo drives.
Kinetix 7000 Drive Catalog Numbers
Drive Cat. No.
2099-BM06-S
2099-BM07-S
2099-BM08-S
2099-BM09-S
2099-BM10-S
2099-BM11-S
2099-BM12-S

Before You Begin

Remove all packing material, wedges, and braces from within and around the components. After
unpacking, check the item nameplate catalog number against the purchase order.
Parts List
The Kinetix 7000 servo drives ship with the following:
•
General purpose I/O (GPIO) wiring header, general purpose relay (GPR) header,
control power (CP), safe-off (SO) wiring plug header with a motion-allowed jumper
•
Ground clamp and strain relief for motor power cable
•
These installation instructions, publication
TIP
Input Voltage
kW
22
30
37
342...528V AC rms
56
Three-phase
75
112
149
Connector kits for user I/O, auxiliary feedback, and motor feedback are not provided.
Replacement connector sets, as described in the
Motion Accessories Technical Data, publication GMC-TD004, for more information on
connector kits and replacement connector sets.
Kinetix 7000 High Power Servo Drives 3
Continuous Output Power
Hp
30
40
50
75
100
150
200
2099-IN003
Parts
Rockwell Automation Publication 2099-IN003C-EN-P - June 2015
Continuous
Output Current
A 0-pk
56
73
92
135
176
254
351
List, are available. Refer to the Kinetix