Nc Alarm Message Screen; Plc Alarm Message Screen - mori seiki ZL-153S Operation Manual

7-6 Function Selection Key
The function selection key
message of the NC and the PLC and also for displaying and setting the data at the periodical
maintenance screen of them.
NC alarm
7-6-1

NC Alarm Message Screen

Function selection key
7-6-2

PLC Alarm Message Screen

Function selection key
MESSAGE
(MESSAGE) is used for displaying and checking the alarm
MESSAGE
PLC alarm
Alarm history
Periodical maintenance
(MESSAGE)
MESSAGE
(MESSAGE)
MESSAGE
(MESSAGE)
To change the screen, press the soft-key corresponding to
the screen to be accessed.
[NC ALARM]
If an NC alarm occurs, the screen automatically changes
to the NC ALARM screen where the alarm number and
the message are displayed.
The NC ALARM screen is also displayed by
pressing the soft-key as indicated above.
A red blinking box is displayed at the upper right
NOTE
area of the screen if a PLC alarm occurs while the
NC ALARM screen is displayed.
[PC ALARM]
If a PLC error occurs, the screen automatically changes to
the PC ALARM screen where the error number and the
message are displayed.
The PC ALARM screen is also displayed by
pressing the soft-key as indicated above.
A red blinking box is displayed at the upper right
NOTE
area of the screen if an NC alarm occurs while the
PC ALARM screen is displayed.
OPERATION PANELS A-119