H3C S3100-52P Operation Manual page 5

Operation Manual – SSH Terminal Service
H3C S3100-52P Ethernet Switch
Table 1-1 SSH2.0 Server configuration tasks
Configure user interface(s) to
support specified protocol(s)
Generate local RSA key pair
Destroy local RSA key pair
Specify
authentication type for SSH
users
Configure authentication type
for an SSH user
Set
timeout time
Set SSH authentication retry
times
Configure a client public key
for an SSH user
I. Configuring user interface(s) to support specified protocol(s)
Table 1-2 Configure user interface(s) to support specified protocol(s)
Enter system view
Enter the view of one or
multiple user interfaces
Configure
interface(s)
specified protocol(s)
Operation
a default
SSH authentication
Operation
system-view
user-interface
[ type-keyword ] number
[ ending-number ]
the user
protocol inbound { all
to support
|ssh | telnet }
Command
protocol inbound
rsa local-key-pair create
rsa local-key-pair
destroy
ssh authentication-type
default
ssh user username
authentication-type
ssh server timeout
ssh server
authentication-retries
ssh user username
assign rsa-key keyname
Command
1-4
Chapter 1 SSH Terminal Service
Related section
Section "Configuring
user interface(s) to
support specified
protocol(s)"
Section "Generating
or destroying
RSA key pair"
Section "Configuring
authentication type for
a user"
Section "Configuring
SSH management
Section "Configuring a
client public key for a
user"
Description
—
Required
Optional
By default, both Telnet
and SSH are supported.
local