H3C S3100-52P Operation Manual page 16

Operation Manual – SSH Terminal Service
H3C S3100-52P Ethernet Switch
Figure 1-9 SSH client interface 2
In the [Protocol options] field, select [2] from the [Preferred SSH protocol version]
section.
V. Open an SSH Connection with RSA
If the client needs to use RSA authentication, you must specify the RSA private key file.
If the client needs to use password authentication, this is not required.
From the category on the left of the window, click [Connection/SSH/Auth]. The following
window appears.
1-15
Chapter 1 SSH Terminal Service