Intel Denverton Series Technical Manual page 44

administrator password.
User Password
If there is no password present on system, please press [Enter] to create new
administrator password. If password is present on system, please press [Enter] to
verify old password then to clear/change password. Press again to confirm the new
administrator password.
 Secure Boot
Press [Enter] to make customized secure settings:
Enable Secure Boot
The optional settings are: [Disabled]; [Enabled].
Secure Boot activated when Platform Key (PK) is enrolled, system mode is
User/Deployed, and CSM function is disabled.
Secure Boot Mode
The optional settings are: [Standard]; [Custom].
Set UEFI Secure Boot Mode to Standard mode or Custom mode.
In Custom mode Secure Boot Variables can be configured without authentication.
This change is effective after save. After reset, this mode will return to Standard
mode.
* When set as [Standard], user can only apply default settings and can not make
further settings in 'Reset to Setup Mode', 'Restore Factory Keys' and
'Key Management';
When set as [Custom], user can make further settings in 'Reset to Setup Mode',
'Restore Factory Keys' and 'Key Management':
Reset to Setup Mode
Use this item to force system to setup mode-delete all Secure Boot Key
databases.
 Restore Factory Keys
Use this item to force system to user mode-restore factory default Secure Boot
Key databases.
 Key Management
This item enables experienced users to modify Secure Boot variables without full
39