Adding track marks automatically
(Auto Time Stamp)
Use this feature to add track marks automatically at specified
intervals when recording through the analog input connector or a
microphone.
1
While the recorder is recording or in recording pause, press
MENU.
2
Press <SELECT, until "TIME MARK" flashes in the
display, and then press ENTER.
3
Press <SELECT, until the desired time interval flashes in the
display, and then press ENTER.
Select one of the following intervals:
Display
OFF
5min. ON
10min. ON
15min. ON
To cancel Auto Time Stamp
Select "OFF" in step 3, and then press ENTER, or stop recording.
26
-GB
<SELECT,
MENU/ENTER
Time
—
Approx. 5 min.
Approx. 10 min.
Approx. 15 min.