Table of Contents
Advertisement
NO DISC
• You tried to play or record with no disc in the recorder.
— Insert an MD.
NO SIGNAL
• The recorder could not detect digital input signals.
— Make sure that the source is connected firmly (page 12).
P/B ONLY
• You tried to record or edit on a premastered MD (P/B stands for
"playback").
— Insert a recordable MD.
PROTECTED
• You tried to record or edit on a MD with the tab in the record-
protect position.
— Slide the tab back (page 54).
SORRY
• You tried to erase the track mark at the beginning of the first track.
• You tried to erase a track mark to combine tracks the recorder
cannot combine (a track recorded in different recording mode, or a
track recorded through a digital connection and an analog
connection, for example).
• You tried to press X, T MARK, or REC MODE during synchro-
recording.
TEMP OVER
• Heat has built up in the recorder.
— Let the recorder cool down.
TR FULL
• There is no more space for new data when you are editing the MD.
— Erase unnecessary tracks (page 40).
TrPROTECT
• You tried to record or edit on a track that is protected from erasing.
— Record or edit on other tracks.
• You tried to edit a track that has been checked out from a computer.
— You cannot use this model to rename or edit a track which has
been checked out from a computer.
62
-GB
Advertisement
Table of Contents
