Editing Recorded Tracks; Erasing Tracks; To Erase A Track - Sony MZ-R701 Operating Instructions Manual

Editing recorded tracks

You can edit your recordings by adding/erasing track marks or
labeling tracks and MDs. Premastered MDs cannot be edited.
Notes on editing
• Do not move or jog the recorder while "TOC Edit"* is flashing in the display.
• You cannot edit tracks on an MD that is record-protected. Before editing
tracks, close the tab on the side of the MD (page 54).
• If you perform an editing operation while playing, be sure not to turn the
power off until "TOC Edit" disappears in the display.
• The lid does not open until "TOC Edit" disappears in the display after
editing.
∗ TOC = Table of Contents
When you operate the recorder with the supplied remote control, use
the buttons and controls shown in parentheses.

Erasing tracks

T MARK

To erase a track

Note that once a recording has been erased, you cannot retrieve it.
Make sure of the track you are erasing.
1
While playing the track you want to erase, press MENU (EDIT
for 2 seconds or more).
40
-GB
<SELECT,
T MARK
MENU/
ENTER
>/.
EDIT
ENTER