Table of Contents
Advertisement
3
Press ENTER (ENTER).
The track is ready to be labeled.
4
Follow steps 3 to 5 of "Labeling a disc during stop".
Labeling a track or a disc during recording
1
While recording, press MENU (EDIT for 2 seconds or more).
2
Press <SELECT, (flip the lever towards > or .)
repeatedly until "EDIT" flashes in the display, and then press
ENTER (ENTER).
"
: Name" flashes in the display.
3
To label a track, press ENTER (ENTER).
To label a disc, press <SELECT, (flip the lever towards >
or .) repeatedly until "
then press ENTER (ENTER).
The track or disc is ready to be labeled.
4
Follow steps 3 to 5 of "Labeling a disc during stop".
To cancel labeling
Press T MARK (T MARK).
Notes
• When the recording is stopped while labeling a track or a disc during
recording, or when the recording moves on to the next track while labeling a
track, the input at that point is entered automatically.
• "LP:" is automatically added at the beginning of track names for tracks
recorded in LP2 or LP4 mode.
Relabeling recordings
Follow the steps corresponding to the labeling method until the disc
or track is ready to be labeled. Enter a new character over the one you
want to change, then press ENTER (ENTER) for 2 seconds or more.
48
-GB
: Name" flashes in the display,
Advertisement
Table of Contents
