Sony MZ-NH600 Operating Instructions Manual page 76

Message
NO GROUP
NO INPUT
SIGNAL
NO NAME
NON GROUPED
TRACK
NotENOUGH
POWER TO
EDIT
NotENOUGH
POWER TO
REC
NO TITLE
NO TRACK
NO TRACK IS
SELECTED
P/B ONLY DISC • You tried to record or edit on a premastered disc (P/B stands for
PC – –MD
PROTECTED
DISC
PUSH STOP
BUTTON
76
Meaning/Remedy
• You tried to release a group setting with a disc that has no groups.
, Insert a disc with group settings.
• You selected " : Erase" with a disc without group setting.
, You cannot erase groups with a disc with no groups.
• The recorder could not detect digital input signals.
, Make sure that the source is connected firmly (page 15).
• You tried to select "Artist" in the Main play mode with a disc that has no
artist name information.
• You tried to select "by Artist" in the Search function with a disc that has
no artist name information.
• You selected " : Move" or "
while the recorder is stopped or while playing a track that does not
belong to a group.
, Select a track within a group you want to edit, and then do the editing
operation again.
• You tried to edit the contents of a 1GB Hi-MD disc with insufficient
battery power for editing (page 65).
, Insert a new alkaline dry battery or connect the AC power adaptor
(not supplied) to the recorder.
• You tried to record on a 1GB Hi-MD disc with insufficient battery power
for recording (page 65).
, Insert a new alkaline dry battery or connect the AC power adaptor
(not supplied) to the recorder.
• You tried to select "Album" in the Main play mode with a disc that has no
album name information.
• You tried to select "by Album" in the Search function with a disc that has
no album name information.
• You tried to play a disc with no recorded tracks.
, Insert a recorded disc.
• You selected " : Move" or "
without first selecting a track.
, Do the editing operation again after selecting the desired track first.
"playback").
, Insert a recordable disc.
• The recorder is connected to the computer.
• You tried to record or edit on a disc with the tab in the record-protect
position.
, Slide the tab back (page 62).
• You tried to open the lid by sliding the OPEN switch while the recorder
was storing disc information with the dedicated USB cable connecting
the recorder to a computer.
, Operation must be done only after pressing x and "SYSTEM FILE
WRITING" has disappeared from the display.
: Erase", or you tried to label a group
: Erase", or you tried to lable a track