Sony MZ-NH600 Operating Instructions Manual page 72

Symptom
You cannot transfer
tracks that will fill
up the remaining
recording time on
the disc.
The disc size
displayed on the
computer is not the
same as the disc
size printed on the
disc.
You cannot operate
the recorder ("PC –
–MD" appears).
The lid does not
open.
Others
Symptom
Some menu items
cannot be displayed.
The recorder does
not work or works
poorly.
72
Cause/Remedy
• The minimum recordable time on a disc is normally 2 seconds in
stereo, 4 seconds in LP2 stereo mode, and 8 seconds in LP4 stereo
mode. When you transfer a track from your computer, the recorder
needs a 2-second (or 4- or 8-second) space for a track even if the track
is under 2 seconds (or 4 or 8 seconds) in length. Also, the recorder
inserts a 2-second (or 4 -or 8-second) space in between tracks during
transfer operation. For this reason, the recorder needs an additional 6
seconds (or 12 or 24 seconds) for each track. This reduces the
maximum recording time for each track by 6 seconds (or 12 or 24
seconds) during transfer operation (in MD mode only).
• The difference is due to the use of the binary system to indicate the disc
size on the computer and the decimal system to express the disc size on
the disc and other recording media. For details on the disc size, see
page 60.
• You cannot operate the recorder while the recorder is connected to the
computer.
• It happens if you disconnect the dedicated USB cable in the middle of a
data transfer, recording, or editing operation on the computer, but while
the dry alkaline battery is drained.
, Reconnect the dedicated USB cable or insert a new dry alkaline
battery into the recorder, and then press x.
Cause/Remedy
• "Menu Mode" is set to "Simple".
, Set the "Menu Mode" to "Advanced" to display all the menu
items.
• The volume is low.
, Turn up the volume.
• No disc is inserted.
, Insert a recorded disc.
• The HOLD function is turned on ("HOLD" appears in the display
when you press an operation button on the recorder).
, On the recorder, disable HOLD by sliding the HOLD switch to the
opposite direction of the arrow
• The lid is not firmly closed.
, Close the lid until it clicks. Then slide OPEN to open the lid.
• Moisture has condensed inside the recorder.
, Take the MD out and leave the recorder in a warm place for several
hours until the moisture evaporates.
• The dry battery is weak ("LOW BATTERY" flashes or nothing
appears).
, Replace the dry battery with a new one.
.
(pages 12, 13)