Environment Protection; Rohs; Weee; Reach - TQ-Systems TQMLS1028A Preliminary User's Manual

Hide thumbs Also See for TQMLS1028A:
Table of Contents

Advertisement

8.

ENVIRONMENT PROTECTION

8.1

RoHS

The TQMLS1028A is manufactured RoHS compliant.
All components and assemblies are RoHS compliant
The soldering processes are RoHS compliant
®
8.2

WEEE

The final distributor is responsible for compliance with the WEEE
Within the scope of the technical possibilities, the TQMLS1028A was designed to be recyclable and easy to repair.
®
8.3

REACH

The EU-chemical regulation 1907/2006 (REACH
substances SVHC (Substances of very high concern, e.g., carcinogen, mutagen and/or persistent, bio accumulative and toxic).
Within the scope of this juridical liability, TQ-Systems GmbH meets the information duty within the supply chain with regard to
the SVHC substances, insofar as suppliers inform TQ-Systems GmbH accordingly.
8.4

EuP

The Ecodesign Directive, also Energy using Products (EuP), is applicable to products for the end user with an annual quantity
>200,000. The TQMLS1028A must therefore always be seen in conjunction with the complete device.
The available standby and sleep modes of the components on the TQMLS1028A enable compliance with EuP requirements for
the TQMLS1028A.
8.5

Battery

No batteries are assembled on the TQMLS1028A.
8.6

Packaging

By environmentally friendly processes, production equipment and products, we contribute to the protection of our
environment. To be able to reuse the TQMLS1028A, it is produced in such a way (a modular construction) that it can be easily
repaired and disassembled. The energy consumption of this subassembly is minimised by suitable measures. The TQMLS1028A is
delivered in reusable packaging.
8.7

Other entries

The energy consumption of this subassembly is minimised by suitable measures.
Due to the fact that at the moment there is still no technical equivalent alternative for printed circuit boards with bromine-
containing flame protection (FR-4 material), such printed circuit boards are still used.
No use of PCB containing capacitors and transformers (polychlorinated biphenyls).
These points are an essential part of the following laws:
The law to encourage the circular flow economy and assurance of environmentally
acceptable removal of waste as at 27.9.94
(Source of information: BGBl I 1994, 2705)
Regulation with respect to the utilization and proof of removal as at 1.9.96
(Source of information: BGBl I 1996, 1382, (1997, 2860))
Regulation with respect to the avoidance and utilization of packaging waste as at 21.8.98
(Source of information: BGBl I 1998, 2379)
Regulation with respect to the European Waste Directory as at 1.12.01
(Source of information: BGBl I 2001, 3379)
This information is to be seen as notes. Tests or certifications were not carried out in this respect.
Preliminary User's Manual l TQMLS1028A UM 0001 l © 2019, TQ-Systems GmbH
®
regulation) stands for registration, evaluation, certification and restriction of
®
regulation.
Page 24

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TQMLS1028A and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents