Mitsubishi Electric RJ51AW12AL User Manual page 22

Others
Function
Parameter access error detection
function
Error status automatic recovery
function
Slave module information acquisition
function at start-up
Backup/restoring function
Easy replacement function for one
*1
slave module
Word data start address setting
*1
function
AnyWireASLINK version compatibility
*1
inspection function
*1 The availability of the function differs depending on the production information of the RJ51AW12AL. ( MELSEC iQ-R
AnyWireASLINK Master Module User's Manual (Application))
3 FUNCTION LIST
20
Description
Allows parameter access errors to be detected.
Allows for automatically clearing error flag for DP/DN disconnection errors and parameter access errors after the error
status is cleared.
Allows for automatic acquisition of information of slave modules when the CPU module is reset or power off and on
the system.
Backs up various information of the connected slave module into the SD memory card of the CPU module.
This function restores the information backed up on the SD memory card of the CPU module into the connected slave
module.
For details, refer to the following.
 iQ Sensor Solution Reference Manual
Allows for automatically setting addresses and device parameters without an address writer when a slave module is
replaced with the same type of it.
Allows for setting start addresses of word data transmission. This function shortens the word transmission cycle time.
Inspects whether a slave module that does not support the word transmission is connected to the RJ51AW12AL or
not.