4.
Click the [OK] button to add the module labels of the RJ51AW12AL.
5.
Set the items in "Basic setting" as follows.
[Navigation window] [Parameter] [Module Information] [RJ51AW12AL] [Module Parameter] [Basic Settings]
6.
Write the set parameters into the CPU module, and reset the CPU module or power off and on the system.
[Online] [Write to PLC]
In this example, default values were used for parameters that are not shown above. For the parameters, refer
to the following.
MELSEC iQ-R AnyWireASLINK Master Module User's Manual (Application)
7 COMMUNICATION EXAMPLE
36
7.1 Communication of RJ51AW12AL with Slave Module