There was an update in remote control software version in order to make it compatible for both products in the
market, so please refer to article code of the remote / software version to be used according this recommendation:
Old TTNR
(with SW WRAF0105)
7-736-503-406
7-736-502-925
The new remote controls are compatible for both Compact 4000S / Optiflow and have new reference and were
implemented from FD >= 660 (Dec. 2016). The old remote controls can be used up until end of stock only with
Compact 4000 S models.
Page 11 from 76
Flame indication:
Indication of flame in the burner
Warning symbol:
Combined with an error indication
/ warning code indicates a faulty
performance
Tap symbol:
Indication of not enough power to
reach set point
Solar application:
Indication that the automatic solar
function is activated, meaning that
the appliance is receiving pre-
heated inlet water, with no need
for burner to start
Fan operation:
Indication that the fan is in
Table 8 – Display Symbols
To be used only with
Compact 4000 S
Table 9 – Remote Control versions
6 720 814 719 SM FP_Australia 2017/04 EN
Symbol displayed when ionization is
The symbol is displayed and burner
operation
New TTNR
(with SW WRAF0106)
Can be used with Compact
7-736-504-467
7-736-504-469
detected - flame presence
In case symbol is displayed,
decrease (-) or increase (+) flow
accordingly
is shutdown when T in is under
following conditions:
T
≥ T
– 1K
in
set
The symbol is deactivated and
burner restarted when:
T
< 60ºC (if T
≤ 50ºC)
out
set
T
< T
+ 10ºC (if T
out
set
set
4000 S / Optiflow
> 50ºC)