Water pipes were cleaned before
connected to the appliance?
Leakage test was done
Inlet water filter was checked and is
cleaned, ensuring the necessary
Accessories for water connections
Water pressure and flow are
according to the appliance
The appliance is suitable for the available gas type?
Pressure reducer and gas pipe are adequate for the required pressure and
Accessories for gas connection are adequate and according to the country
Pict. 7 – Manometer pipe connection to measure static/dynamic gas supply pressure
Measure water flow and temperature increase to check temperature and instantaneous water flow, assuring
correct operation of the appliance.
Page 7 from 76
- Nominal pressure: 300 - 700 kPa
- Minimum pressure: 100 kPa
- Maximum pressure: 1000kPa
Table 5 – Check list hydraulic connections
Table 6 – Check list for gas connections
6 720 814 719 SM FP_Australia 2017/04 EN
(showing indoor version)