Wi-Fi Hotspot; Connect Via Wps Pin; Connect Via Wps Pbc (Push Button); Connect Using Security Key - Aston Martin DB11 Owner's Handbook Manual

Wi-Fi Hotspot

Your vehicle can be used as a Wi-Fi hotspot hub to provide
internet access to other Wi-Fi enabled devices such as a mobile
phone or tablet.
Wi-Fi must be activated on both the internet device and the
infotainment system.
To create a Wi-Fi connection, an Internet-enabled mobile device
must be paired to the vehicle (Refer to 'Pairing a Device', page
7.3). Navigate through the device settings to set a mobile hotspot.
The exact Wi-Fi connection procedure will be device
dependant. Follow the manufacturer's operating instructions.
To activate Wi-Fi on the vehicle:
• Navigate to VEHICLE on the main menu.
• Select System Settings.
• Select Wi-Fi, then Activate and set to ON.
To Connect A Device
• Navigate to VEHICLE on the main menu.
• Select System Settings.
• Select Wi-Fi.
You will have three available connection options:

• Connect via WPS PIN

• Connect via WPS PBC

• Connect Using Security Key

Connect via WPS PIN
For this type of connection, the device to be connected must
support "Connect using WPS PIN".
Select the vehicle from the device to be connected and "Connect
using WPS PIN". The vehicle SSID will be displayed as AML
WLAN XXXXX.
The mobile device will generates a PIN. Enter this PIN into the
infotainment system.

Connect via WPS PBC (Push Button)

Select the vehicle from the device to be connected and "Connect
via WPS PBC". The vehicle SSID will be displayed as AML WLAN
XXXXX.
Select Continue in the infotainment system.
Connect using security key
Select the vehicle from the device to be connected. The vehicle
SSID will be displayed as AML WLAN XXXXX.
Enter the security key shown in the infotainment system into the
device to be connected.
Generate security key
Select to generate a security key. To save the security key, rotate
the CONTROL DIAL and select Save.
The new security key will now be displayed and verified when a
Wi-Fi connection is established.
The connection must be re-established with the newly
created security key.
8.19
Media Systems