PYRO START PLUS / SL PYRO START PLUS / SL | Lightweight wheelchair Lightweight wheelchair | Index Preliminary Remark Accessories 1.1. Signs and Symbols 5.1. Tip protection and anti-tip wheels Important Safety Instructions 5.2. Safety belt 2.1. General Safety Instructions 5.3.
Follow the directions in the manual! depth and lower leg length means the Pyro Start Plus can be adjusted to your individual body size. The Pyro Start Plus is made for both indoor 2. Important safety instructions and outdoor use.
The maximum user load is 125 kg for the Pyro Start Plus • Please note, the frame and pad parts may cool down significantly model and 150 kg for the Pyro Start Plus SL model.
As the manufacturer of the product B+B declares Pyro Start Plus and Pyro Start Plus SL wheelchairs meet the requirements of Directive Check the contents for completeness and make sure nothing is 93/42/EEC in full.
PYRO START PLUS / SL PYRO START PLUS / SL | Lightweight wheelchair Lightweight wheelchair | 3.2. Type plate and serial number 3.3. Contents The type plate (see fig. 01) and serial number are located under the The scope of supply in the special box includes: frame.
| Lightweight wheelchair Lightweight wheelchair | 3.4. Summary To make the use of your B+B wheelchair as simple as possible, we have provided detailed illustrations in addition to the written instructions. The following illustrations should help you to identify the individual assemblies and how they interact (see figs.
4. Assembly and adjustments Folding Place your B+B wheelchair next to you. Tip it by pulling the backrest towards you, until the load is taken off the opposite drive wheel. You can carry out the adjustments of your wheelchair yourself with a little manual dexterity.
Do not use the side parts to lift up the wheelchair! To make it as easy as possible to get into and out of your B+B folding wheelchair, if necessary you can simply swing the legrests away either outwards or inwards, without having to remove them (see fig. 10).
PYRO START PLUS / SL PYRO START PLUS / SL | Lightweight wheelchair Lightweight wheelchair | 4.4. Seat The arm supports for the side parts (desk/long) are fitted as desk (short) on delivery. 4.4.1 Seat height • You can change the arm supports to the long setting in just a few You can adapt the seat height to your individual needs in just steps.
PYRO START PLUS / SL PYRO START PLUS / SL | Lightweight wheelchair Lightweight wheelchair | 4.5. Wheelbase 2. Height of the front wheel • • First, remove the masking on the optional drill holes (see Fig. 18). • • Loosen the axle (Allen key, SW 4) and take it out completely.
The spoked wheels are attached to the frame by means of a floating the gap between the surface of the wheel and the braking bolt is axle (Ø12mm), (see fig. 23). The Pyro Start Plus model comes with 15 mm with the brake off (see fig. 23). The braking bolt must be floating axles as standard.
PU tyres (puncture-proof, no valve) size 24“x1 “ are fitted as standard on your Pyro Start Plus. Pneumatic tyres are available as an option. If To make the transport of your wheelchair considerably they become worn or defective, the authorised mobility dealer should easier, the wheels are equipped with floating axles as be asked to carry out the repair.
5. Accessories 5.3. Drum brake 5.1. Tip protection and anti-tip As an option, the Pyro Start Plus can be equipped with a drum brake, wheels which should only be operated by an accompanying person via the brake lever on the push handles.
First fold the foot plates up or remove the leg rests. entrapment! • Move the Pyro Start Plus and the current or intended seat together front to front if possible and decelerate the Pyro Start Plus. • If you wish to move from another wheelchair or room chair, lock it 6.1.
The critical obstacle height is the height in which the centre of gravity Sit in your B+B wheelchair. Make sure you are sitting as far back as (with the user) is right vertical over the obstacle rim. If the user tries to possible.
Armrest: • Fixation points on the restraint system (see fig. D) All products approved by B+B for use as seats in vehicles are tested Standard equipment for: in accordance to ISO 7176-19. The tests in accordance to ISO 7176- *Pyro Start Plus / **Pyro Start Plus SL 19 were performed using restraint systems from AMF-Bruns.
Observe our included overview of the most important care, hygiene and maintenance work. Should you have any questions, please contact the B+B customer service at +49 700 - 6000 7070. 9.2. Check before use The wheelchair shall be inspected in accordance to 9.2.1.
11. Use by others 14. Warranty The Pyro Start Plus is appropriate for use by others. For use by others, Guarantee items refer to all defects of the wheelchair which can the wheelchair must first be thoroughly cleaned and disinfected demonstrably be referred to material defect or manufacturing defect.
Page 21
In spite of careful research and editing, incorrect information may Warranty certificate have crept into our operating manuals. The current version of each instruction manual is ready for download at the B+B website: www.bischoff-bischoff.com Model: Pyro Start Plus Model number:...
Need help?
Do you have a question about the Pyro Start Plus and is the answer not in the manual?
Questions and answers