Advertisement
Technical Instructions
Document Number 155-767
February 25, 2009
Changing the
Configuration,
Once the Interface Module is in CONFIGURATION Mode, it will send its current
configuration to the terminal program.
Continued
Page 6
Figure 9. MicroGate II Configuration Display.
Save Configuration
Table 5. Keyboard Navigation.
Use the UP and DOWN arrows, on the computer
keyboard, to navigate to the field you want to change.
Change values with the LEFT and RIGHT arrows.
Navigate to here and press ENTER to save changes.
Modbus RTU Interface Module for SED2
Siemens Industry, Inc.
Advertisement
