Vega VEGAMAG 81 Supplementary Instructions Manual page 5

Fig. 3: Possible chamber closings (A, C) and vent connections (E) or drain connections (D)
1 Vent connection - Flange with thread G½ or ½ NPT
2 Chamber closing - top (without vent connection)
3 Vent connection - Flange with flange connection
4 Vent connection - Pipe cap welded to thread G½ or ½ NPT
5 Pipe cap welded (without vent connection)
6 Vent connection - Pipe cap welded to flange connection
VEGAMAG 81 •
D E
1
D E
4
Note:
Keep in mind for the planning that on top or bottom at least one flange
connection is required so that the float can be inserted in the measur-
ing pipe and also removed.
D E
2 3
D E
5 6
1 Product description
5