Table of Contents
Advertisement
17
Technical Information
How to Connect the Open-Collector Inputs of the Controller
How to Connect the Outputs of the Controller
The following figure shows a typical logic output connection (relay
coil) but any other device may be connected e.g. a LED, a computer,
etc., and the related simplified circuit of the controller.
The figure example refers to the programmable set point signal on
pins 11 and 9.
Figure 13
156/181
TwisTorr Medium-TMP onboard Controller User Manual / 87-901-050-01 (B)
Output connection
Advertisement
Chapters
Table of Contents
