Table of Contents
Advertisement
How to Connect the Open-Collector Inputs of the
Controller
Here below there are the typical connections of the open collector
input of the integrated controller to an external system. Two cases
are considered:
1. the customer supplies the 24 Vdc
2. the customer does not supply the 24 Vdc
Please note that on the connector a 24 Vdc, 60 mA voltage, a
GROUND signal and the open collector pin are available.
Figure 10
TwisTorr Medium-TMP onboard Controller User Manual / 87-901-050-01 (B)
How to Connect the Open-Collector Inputs of the Controller
Case 1
Technical Information
153/181
17
Advertisement
Chapters
Table of Contents
